SWD9515 kanu ʻia ke aʻa o ka hale i ka pale ʻana i ka pale pale polyurea kūikawā
Nā hiʻohiʻona huahana a me nā pono
* ʻAʻohe solvent, 100% paʻa maʻiʻo, palekana, pili kaiapuni a me ka ʻala ʻole.
* Hoʻōla wikiwiki, hiki ke hoʻopuʻi ʻia ma nā ʻaoʻao i piko, slope a me ke kūpaʻa ʻole, ʻaʻohe luʻu.
* ʻO ka uhi paʻa, paʻa ʻole, me ka maʻalahi.
*Ka ikaika hoʻopili ikaika, hoʻopaʻa maikaʻi maikaʻi i ke kila, ka lāʻau, nā aniani a me nā substrates ʻē aʻe.
* Kūleʻa hopena maikaʻi loa, kūʻē abrasion
* ʻOi aku ka maikaʻi o ka corrosion a me ka pale kemika i nā waikawa, alkali, paʻakai etc.
* ʻOi aku ka maikaʻi o ka hoʻopaʻa ʻana i ke aʻa mea kanu, ke kū ʻana i ke komo ʻana a me ka wai ʻole
* Hana maikaʻi i ka haʻalulu
* Kūleʻa maikaʻi i ka hoʻololi wela
* Ho'ōla wikiwiki, hoʻi ka pūnaewele noi i ka lawelawe wikiwiki
* ʻO ka lōʻihi maikaʻi e hōʻemi i ke kumukūʻai mālama o ke ola lawelawe
* Hoʻonui i ke ola lawelawe o ka hale i hoʻoheheʻe ʻia
Nā noi huahana
ʻO ka pale ʻana o ke aʻa i ka pale wai ʻole o ke kīhāpai hale, ka pā kūlanakauhale a me nā hale kanu ʻē aʻe
ʻIke huahana
| 'ikamu | A | B
|
| Ka nana aku | Wai melemele ʻeleʻele | Ka waihoʻoluʻu hiki ke hoʻololi |
| Kaumaha kiko (g/m³) | 1.13 | 1.04 |
| Viscosity（cps）@25℃ | 810 | 670 |
| Maʻiʻo paʻa （%） | 100 | 100 |
| Lakiō huikau | 0 | 0 |
| Ka manawa gel(kekona）@25℃ | 1 | 1 |
| Ka manawa maloʻo(kekona) | 3-5 | |
| Ka Ui Manaʻo (dft) | 1.02kg/㎡ mānoanoa kiʻiʻoniʻoni:1mm | |
Nā waiwai kino o nā huahana
| Nā mea | Kūlana hoʻāʻo | Ka hopena |
| ʻOʻoleʻa (Kaʻe A) | ASTM D-2240 | 89 |
| Laki elongation (%）) | ASTM D-412 | 450 |
| Ka ikaika tensile（Mpa） | ASTM D-412 | 17 |
| Kaha waimaka (N/km) | ASTM D-624 | 65 |
| Hiki ʻole (0.3Mpa/30min) | HG/T 3831-2006 | impermeable |
| Kākoʻo ʻaʻahu (750g/500r）/mg | HG/T 3831-2006 | 4.2 |
| Ka ikaika pipili（Mpa）ke kumu paʻa | HG/T 3831-2006 | 3.4 |
| Ka ikaika pipili（Mpa) kumu kila | HG/T 3831-2006 | 11 |
| ʻO ka mānoanoa（g/cm³） | GB/T 6750-2007 | 1.02 |
| Hoʻokuʻu ʻia ʻo Cathodic [1.5v,(65±5)℃，48h] | HG/T 3831-2006 | ≤15mm |
palapala noi
E hoʻoulu i ka ʻāpana B ma mua o ka hoʻohana ʻana, e hui pono i nā puaʻa i waiho ʻia, a i ʻole e hoʻopilikia ʻia ka maikaʻi o ka huahana.
kāpīpī i ka polyurea i loko o ka manawa kūpono inā hoʻomaka ka ʻili o ka substrate.No ke ʻano noi a me ka manawa manawa o ka SWD polyurea speical primer e ʻoluʻolu e nānā i nā palapala ʻē aʻe o nā hui SWD.
E hoʻopili mau i ka SWD spray polyurea ma kahi wahi liʻiliʻi ma mua o ka hoʻohana nui ʻana e nānā pono i ka ratio hui ʻana, ka waihoʻoluʻu a me ka hopena o ka pulupulu.No ka ʻike kikoʻī o ka noi e ʻoluʻolu e nānā i ka pepa aʻo hou onā ʻōlelo aʻoaʻo o ka SWD spray polyurea series.
Ka manawa ho'ōla huahana
| Ka wela o ka lepo | Maloo | Kaʻa wāwae | Paʻa maloʻo |
| +10 ℃ | 20s | 45 min | 7d |
| +20 ℃ | 15s | 15 min | 6d |
| +30 ℃ | 12s | 5 min | 5d |
Hoʻomaopopo: ʻokoʻa ka manawa hoʻōla me ke kūlana kaiapuni ʻoi aku ka mahana a me ka haʻahaʻa pili.
Ola ola
* Mai ka lā o ka mea hana a me ke kūlana i hoʻopaʻa ʻia i ka pūʻolo kumu:
A: 10 mahina
B: 10 mahina
*Panahana mālama:+5-35°C
Hoʻopili: Māhele A 210kg / pahu, ʻāpana B 200kg / pahu
E hoʻopaʻa pono i ka pūʻolo huahana
* E kūʻai ma kahi ʻoluʻolu a me ka makani, e pale i ka ʻike ʻana i ka lā.
