SWD900 pulupulu polyurea elastomer anticorrosion pale pale pale
Nā hiʻohiʻona huahana a me nā pono
* ʻAʻohe solvent, 100% paʻa, palekana, pili kaiapuni a me ka ʻala ʻole.
* Hiki ke ho'ōla wikiwiki ʻia, hiki ke hoʻopuʻi ʻia ma luna o nā ʻaoʻao i piko, slope a me ke kūpaʻa me ka ʻole o ka luʻu.
* ʻO ka uhi paʻa, paʻa ʻole, me ka maʻalahi.
*Ka ikaika hoʻopili kiʻekiʻe, ka hoʻopaʻa wikiwiki ʻana i ke kila, ka lāʻau, nā ʻāpana aniani a me nā mea ʻē aʻe.
* Kūleʻa hopena maikaʻi loa, kūʻē abrasion
* ʻO ka anticorrosion maikaʻi a me ke kūʻē kemika i nā waikawa, alkali, paʻakai etc.
* Hana maikaʻi ʻole wai
* Hana maikaʻi i ka haʻalulu
* Kūleʻa maikaʻi i ka hoʻololi wela
* Ho'ōla wikiwiki, hoʻi ka pūnaewele noi i ka lawelawe wikiwiki
* Ka lōʻihi maikaʻi e hōʻemi i ke kumukūʻai mālama no ke ola a pau
* Hoʻonui i ke ola lawelawe o ka hale i hoʻoheheʻe ʻia
Nā laulā noi
ʻO ka anticorrosion a me ka pale wai o ke kūkulu ʻana, nā kemika, ka lawe ʻana, ka metallurgy, ka mana uila, ka aerospace, ka moana, ka hana moku a me nā māla ʻē aʻe.
ʻIke huahana
| 'ikamu | Mahele A | Mahele B |
| Ka nana aku | Wai melemele ʻeleʻele | Ka waihoʻoluʻu hiki ke hoʻololi |
| Kaumaha kiko (g/m³) | 1.12 | 1.05 |
| Viscosity（cps）@25℃ | 800 | 650 |
| Maʻiʻo paʻa （%） | 100 | 100 |
| Lakiō hui （ma ka leo） | 1 | 1 |
| Ka manawa gel (kekona）@25℃ | 4-6 | |
| Ka manawa maloʻo o ka ʻili (kekona) | 15-40 | |
| ʻO ka uhi manaʻo (dft) | 1.08kg/㎡ mānoanoa kiʻiʻoniʻoni:1mm | |
Nā waiwai kino maʻamau
| 'ikamu | Kūlana hoʻāʻo | Ka hopena |
| ʻOʻoleʻa (Kaʻe A) | ASTM D-2240 | 92 |
| Laki elongation (%）) | ASTM D-412 | 480 |
| Ka ikaika tensile（Mpa） | ASTM D-412 | 19 |
| Kaha waimaka (kN/m) | ASTM D-624 | 68 |
| Hiki ʻole (0.3Mpa/30min) | HG/T 3831-2006 | Impermeable |
| Kākoʻo ʻaʻahu（750g/500r）/mg | HG/T 3831-2006 | 4.2 |
| Ka ikaika pipili（Mpa）ke kumu paʻa | HG/T 3831-2006 | 3.2 |
| Ka ikaika pipili（Mpa) kumu kila | HG/T 3831-2006 | 11.3 |
| ʻO ka mānoanoa（g/cm³） | GB/T 6750-2007 | 1.02 |
| Hoʻokuʻu ʻia ʻo Cathodic [1.5v, (65±5) ℃, 48h] | HG/T 3831-2006 | ≤15mm |
Kūleʻa kemika
| ʻO ka pale ʻana i ka ʻakika 10%H2SO4 a i ʻole 10%HCI,30d | ʻAʻohe ʻōpala, ʻaʻohe ʻōhū, ʻaʻohe ʻili |
| Palekana alkali 10% NaOH, 30d | ʻAʻohe ʻōpala, ʻaʻohe ʻōhū, ʻaʻohe ʻili |
| ʻO ke kūpaʻa paʻakai 30g/L,30d | ʻAʻohe ʻōpala, ʻaʻohe ʻōhū, ʻaʻohe ʻili |
| Paʻakai paʻakai pale, 2000h | ʻAʻohe ʻōpala, ʻaʻohe ʻōhū, ʻaʻohe ʻili |
| ʻAila pale 0 # diesel, pala, 30d | ʻAʻohe ʻōpala, ʻaʻohe ʻōhū, ʻaʻohe ʻili |
| (No ka ʻike: loaʻa ka ʻikepili i luna ma muli o ke kūlana hōʻike GB/T9274-1988. | |
Kaiapuni noi
| Ka mahana wela | 0 ℃-45 ℃ |
| ʻO ka wela ma mua o ka wela | 65℃-70°C |
| Pipe pre-wela wela | 55 ℃-65 ℃ |
| ʻAno haʻahaʻa pili | ≤90% |
| Lae hau | ≥3 ℃ |
Alakaʻi noi
| Manaʻo i ka mīkini hoʻoheheʻe | GRACO H-XP3 ʻO nā mea hoʻoheheʻe Polyurea |
| pū puhi | Fusion-ea hoʻomaʻemaʻe a i ʻole hoʻomaʻemaʻe mechanical |
| Pumi paʻa | 2300-2500psi |
| Pumi ikaika | 2000-2200psi |
| Paipai i ka mānoanoa kiʻiʻoniʻoni | 1000-3000μm |
| Hoʻopili hou ʻana | ≤6h |
palapala noi
E hoʻoulu i ka ʻāpana B ma mua o ka hoʻohana ʻana, e hui pono i nā puaʻa i waiho ʻia, a i ʻole e hoʻopilikia ʻia ka maikaʻi o ka huahana.
E kāpīpī i ka polyurea i loko o ka manawa kūpono inā hoʻomaka ka ʻili o ka substrate.No ke ʻano noi a me ka manawa manawa o SWD polyurea speical primer e ʻoluʻolu e nānā i ka palapala ʻē aʻe o ka hui SWD.
E hoʻopili mau iā SWD900 ma kahi wahi liʻiliʻi ma mua o ka hoʻohana nui ʻana e nānā i ka ratio hui ʻana, pololei ka waihoʻoluʻu a me ka hopena.No ka ʻike kikoʻī o ka noi e ʻoluʻolu e nānā i ka pepa aʻo hou onā ʻōlelo aʻoaʻo o ka SWD spray polyurea series.
ʻO ka manawa hoʻoponopono huahana
| Ka wela o ka lepo | Maloo | Kaʻa wāwae | Paʻa maloʻo |
| +10 ℃ | 30s | 45 min | 7d |
| +20 ℃ | 23s | 15 min | 6d |
| +30 ℃ | 17s | 5 min | 5d |
Hoʻomaopopo: ʻokoʻa ka manawa hoʻōla me ke kūlana kaiapuni ʻoi aku ka mahana a me ka haʻahaʻa pili.
Ola ola
* Mai ka lā o ka mea hana a me ke kūlana i hoʻopaʻa ʻia i ka pūʻolo kumu:
Mahele A: 10 mahina
Mahele B: 10 mahina
*Panahana mālama:+5-35°C
Hoʻopili: Māhele A 210kg / pahu, ʻāpana B 200kg / pahu
E hoʻopaʻa pono i ka pūʻolo huahana
* E kūʻai ma kahi ʻoluʻolu a me ka makani, e pale i ka ʻike ʻana i ka lā.
ʻO ka ʻike olakino a me ka palekana o ka huahana
No ka ʻike a me ka ʻōlelo aʻo e pili ana i ka mālama pono ʻana, ka mālama ʻana a me ka hoʻokuʻu ʻana i nā huahana kemika, e nānā nā mea hoʻohana i ka Pepa ʻIkepili Palekana Material hou loa e loaʻa ana nā ʻikepili pili kino, ecological, toxicological a me nā mea e pili ana i ka palekana.
Hōʻike kūpaʻa
Hoʻopaʻa ʻo SWD i nā ʻikepili ʻenehana āpau i hōʻike ʻia ma kēia pepa e pili ana i nā hoʻokolohua laboratory.Hiki ke ʻokoʻa nā ʻano hoʻokolohua maoli ma muli o nā kūlana like ʻole.No laila e ʻoluʻolu e hoʻāʻo a hōʻoia i kona kūpono.ʻAʻole lawe ʻo SWD i nā kuleana ʻē aʻe koe wale nō ka maikaʻi o ka huahana a mālama i ke kuleana o nā hoʻololi i ka ʻikepili i helu ʻia me ka ʻole o ka hoʻolaha mua.
